XCR3032XL-10CS48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3032XL |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 750 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.8mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3032XL-10CS48I Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 48-FBGA, CSPBGA package.It is programmed with 36 I/Os.It is programmed that device terminations will be 48 .The terminal position of this electrical component is BOTTOM.A voltage of 3.3Vprovides power to the device.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.As part of the CoolRunner XPLA3series, it is a type of FPGA.A chip with 48pins is programmed.When using this device, YEScan also be found.You can find its related parts in the [0].The 750gates serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.There are 48pins on it.Vsup reaches 3.6Vas the maximum supply voltage.It is recommended that the maximum frequency be less than 95MHz.There are 2 logic elements/cells to form a fundamental building block.
XCR3032XL-10CS48I Features
48-FBGA, CSPBGA package
36 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
XCR3032XL-10CS48I Applications
There are a lot of Xilinx Inc. XCR3032XL-10CS48I CPLDs applications.
- Portable digital devices
- STANDARD SERIAL INTERFACE UART
- Software-driven hardware configuration
- Synchronous or asynchronous mode
- Address decoders
- High speed graphics processing
- Cross-Matrix Switch
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Code converters
- D/T registers and latches
