XCR3032XL-10CSG48C
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 750 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.8mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e1 |
XCR3032XL-10CSG48C Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 48-FBGA, CSPBGA package.The device is programmed with 36 I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 3.3Vvolts.It belongs to the family [0].Package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the CoolRunner XPLA3 series.The chip is programmed with 48 pins.Additionally, this device is capable of displaying [0].750gates are used to construct digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].EEPROM is adopted for storing data.The electronic component is mounted by Surface Mount.This board has 48 pins.In this case, the maximum supply voltage (Vsup) reaches 3.6V.It should be below 95MHzat the maximal frequency.Fundamental building blocks consist of 2logic elements/cells.
XCR3032XL-10CSG48C Features
48-FBGA, CSPBGA package
36 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
XCR3032XL-10CSG48C Applications
There are a lot of Xilinx Inc. XCR3032XL-10CSG48C CPLDs applications.
- I2C BUS INTERFACE
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Boolean function generators
- Complex programmable logic devices
- State machine control
- STANDARD SERIAL INTERFACE UART
- Multiple DIP Switch Replacement
- Digital designs
- Synchronous or asynchronous mode
- Reset swapping
