XCR3064XL-10CP56I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of I/O | 48 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3064XL-10CP56I Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 56-LFBGA, CSPBGA package.There are 48 I/Os on the board.There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.It is a part of the family [0].It is packaged in the way of Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The CoolRunner XPLA3series comprises this type of FPGA.It has 56pins programmed.This device also displays [0].In accordance with the [0], its related parts are listed.There are 1500 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.The pins are [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 2.7V.The maximum frequency should not exceed 95MHz.Basic building blocks have 4logic elements.
XCR3064XL-10CP56I Features
56-LFBGA, CSPBGA package
48 I/Os
The operating temperature of -40°C~85°C TA
56 pin count
56 pins
XCR3064XL-10CP56I Applications
There are a lot of Xilinx Inc. XCR3064XL-10CP56I CPLDs applications.
- Multiple Clock Source Selection
- Power up sequencing
- I2C BUS INTERFACE
- State machine design
- ON-CHIP OSCILLATOR CIRCUIT
- Preset swapping
- Programmable polarity
- PLC analog input modules
- Programmable power management
- Bootloaders for FPGAs
