XCR3064XL-10CS48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of I/O | 40 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.8mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3064XL-10CS48I Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 48-FBGA, CSPBGA package.In this case, there are 40 I/Os programmed.Terminations of devices are set to [0].The terminal position of this electrical component is BOTTOM.An electrical supply voltage of 3.3V is used to power it.There is a part included in Programmable Logic Devices.Trayshould be used for packaging the chip.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.As part of the CoolRunner XPLA3series, it is a type of FPGA.The chip is programmed with 48 pins.This device is also capable of displaying [0].The XCR3064XLshows its related parts.As a building block for digital circuits, there are 1500gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].Surface Mountmounts this electronic component.The device has a pinout of [0].A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 2.7V is required for this device to operate.It is important to make sure that the maximum frequency is less than 95MHz.There are 4 logic elements/cells to form a fundamental building block.
XCR3064XL-10CS48I Features
48-FBGA, CSPBGA package
40 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
XCR3064XL-10CS48I Applications
There are a lot of Xilinx Inc. XCR3064XL-10CS48I CPLDs applications.
- PLC analog input modules
- Power Meter SMPS
- Power up sequencing
- Custom shift registers
- Multiple Clock Source Selection
- Software-driven hardware configuration
- Software-Driven Hardware Configuration
- Bootloaders for FPGAs
- Portable digital devices
- TIMERS/COUNTERS
