XCR3064XL-10CSG48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 40 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.8mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
XCR3064XL-10CSG48C Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 48-FBGA, CSPBGA package.As you can see, this device has 40 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the CoolRunner XPLA3 series.Chips are programmed with 48 pins.It is also possible to find YESwhen using this device.1500gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].For storing data, it is recommended to use [0].This device is mounted by Surface Mount.There are 48 pins embedded in the device.The maximal supply voltage (Vsup) reaches 3.6V.It is recommended not to exceed 95MHzin terms of frequency.A fundamental building block consists of 4logic elements/cells.
XCR3064XL-10CSG48C Features
48-FBGA, CSPBGA package
40 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
XCR3064XL-10CSG48C Applications
There are a lot of Xilinx Inc. XCR3064XL-10CSG48C CPLDs applications.
- Synchronous or asynchronous mode
- Digital multiplexers
- DMA control
- Interface bridging
- Field programmable gate
- ToR/Aggregation/Core Switch and Router
- I/O expansion
- Configurable Addressing of I/O Boards
- Programmable polarity
- Page register
