XCR3064XL-10VQ100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3064XL-10VQ100I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the 100-TQFPpackage, you will find it.It is equipped with 68I/O ports.There are 100 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 3.3V.There is a part in the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].The chip should be mounted by Surface Mount.The FPGA belongs to the CoolRunner XPLA3 series.A chip with 100pins is programmed.This device can also display [0].The XCR3064XLindicates that related parts can be found.It is possible to construct digital circuits using 1500gates, which are devices that serve as building blocks.High efficiency requires a voltage supply of [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.The device is designed with pins [0].It operates at a maximum supply voltage of 3.6V volts.A minimum supply voltage of 2.7V is required for it to operate.It is recommended that the maximum frequency be less than 95MHz.In order to form a fundamental building block, there are 4logic elements/cells.
XCR3064XL-10VQ100I Features
100-TQFP package
68 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
XCR3064XL-10VQ100I Applications
There are a lot of Xilinx Inc. XCR3064XL-10VQ100I CPLDs applications.
- TIMERS/COUNTERS
- Software Configuration of Add-In Boards
- Multiple DIP Switch Replacement
- Portable digital devices
- Software-driven hardware configuration
- Preset swapping
- Programmable power management
- I/O PORTS (MCU MODULE)
- POWER-SAVING MODES
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
