XCR3064XL-10VQ44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3064XL-10VQ44C Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 44-TQFP package containing it.The device is programmed with 36 I/O ports.There is a 44terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the CoolRunner XPLA3series contain this type of chip.44pins are programmed on the chip.This device is also capable of displaying [0].XCR3064XLcontains its related parts.1500gates are used to construct digital circuits.High efficiency requires a voltage supply of [0].In order to store data, EEPROMis used.In this case, Surface Mountis used to mount the electronic component.There are 44 pins embedded in the device.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.It is recommended that the maximal frequency be lower than 95MHz.Fundamental building blocks consist of 4logic elements/cells.
XCR3064XL-10VQ44C Features
44-TQFP package
36 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
XCR3064XL-10VQ44C Applications
There are a lot of Xilinx Inc. XCR3064XL-10VQ44C CPLDs applications.
- Parity generators
- Software-Driven Hardware Configuration
- Protection relays
- Boolean function generators
- Timing control
- Page register
- Storage Cards and Storage Racks
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Synchronous or asynchronous mode
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
