XCR3064XL-7PC44I
| Parameters | |
|---|---|
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 7ns |
| Number of Logic Elements/Blocks | 4 |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 36 |
| Clock Frequency | 119MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
XCR3064XL-7PC44I Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 44-LCC (J-Lead).It is programmed with 36 I/Os.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The power supply voltage is 3.3V.It is a part of the family [0].Tubeshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the CoolRunner XPLA3series of FPGAs.A chip with 44pins is programmed.This device is also capable of displaying [0].There are related parts in [0].A digital circuit is built using 1500gates.Surface Mountis the mounting point of this electronic part.The device has a pinout of [0].There are 4 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 3/3.3V power supplies are needed to run it.3.6Vis the maximum supply voltage (Vsup).Vsup (supply voltage) must be greater than 3V.It should not exceed 119MHzin its clock frequency.
XCR3064XL-7PC44I Features
44-LCC (J-Lead) package
36 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
3/3.3V power supplies
XCR3064XL-7PC44I Applications
There are a lot of Xilinx Inc. XCR3064XL-7PC44I CPLDs applications.
- POWER-SAVING MODES
- State machine control
- Software Configuration of Add-In Boards
- Custom shift registers
- Pattern recognition
- TIMERS/COUNTERS
- Protection relays
- INTERRUPT SYSTEM
- Power automation
- Digital multiplexers
