XCR3064XL-7VQ100C
| Parameters | |
|---|---|
| Delay Time tpd(1) Max | 7ns |
| Height Seated (Max) | 1.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3064XL |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 119MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
XCR3064XL-7VQ100C Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 100-TQFP package.There are 68 I/Os programmed in it.The device is programmed with 100 terminations.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 3.3V voltage supply for this device.This part is part of the family [0].It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the CoolRunner XPLA3 series.It is equipped with 100 pin count.This device is also capable of displaying [0].The XCR3064XLcan be used to identify its related parts.In digital circuits, 1500gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.The device is designed with pins [0].In this case, the maximum supply voltage (Vsup) reaches 3.6V.It is recommended that the maximal frequency be lower than 119MHz.An elementary building block consists of 4logic elements/cells.
XCR3064XL-7VQ100C Features
100-TQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
XCR3064XL-7VQ100C Applications
There are a lot of Xilinx Inc. XCR3064XL-7VQ100C CPLDs applications.
- Random logic replacement
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Cross-Matrix Switch
- Complex programmable logic devices
- Multiple DIP Switch Replacement
- White goods (Washing, Cold, Aircon ,...)
- D/T registers and latches
- Bootloaders for FPGAs
- Interface bridging
