XCR3128XL-10CS144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-TFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 108 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3000 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
XCR3128XL-10CS144C Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 144-TFBGA, CSPBGA package.There are 108 I/Os programmed in it.It is programmed that device terminations will be 144 .Its terminal position is BOTTOM.A voltage of 3.3Vprovides power to the device.This part is in the family [0].Bulkshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.The FPGA belongs to the CoolRunner XPLA3 series.The chip is programmed with 144 pins.When using this device, YEScan also be found.It is possible to construct digital circuits using 3000gates, which are devices that serve as building blocks.High efficiency requires a voltage supply of [0].Data is stored using [0].There are 144 pins embedded in the device.In this case, the maximum supply voltage (Vsup) reaches 3.6V.It is important to make sure that the maximum frequency is less than 95MHz.In order to form a fundamental building block, there are 8logic elements/cells.
XCR3128XL-10CS144C Features
144-TFBGA, CSPBGA package
108 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
XCR3128XL-10CS144C Applications
There are a lot of Xilinx Inc. XCR3128XL-10CS144C CPLDs applications.
- Address decoders
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power up sequencing
- ON-CHIP OSCILLATOR CIRCUIT
- Synchronous or asynchronous mode
- Random logic replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Portable digital devices
- Preset swapping
- Storage Cards and Storage Racks
