XCR3128XL-10TQG144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 108 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3000 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XCR3128XL-10TQG144I Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].There are 108 I/Os on the board.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].It is recommended to package the chip by Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.There should be a Surface Mounton the chip.As part of the CoolRunner XPLA3series, it is a type of FPGA.In this chip, the 144pins are programmed.If you use this device, you will also find [0].A digital circuit can be constructed using 3000gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.The 144pins are designed into the board.3.6Vrepresents the maximal supply voltage (Vsup).The maximal frequency should be lower than 95MHz.In order to form a fundamental building block, there are 8 logic elements or cells.
XCR3128XL-10TQG144I Features
144-LQFP package
108 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
XCR3128XL-10TQG144I Applications
There are a lot of Xilinx Inc. XCR3128XL-10TQG144I CPLDs applications.
- I/O PORTS (MCU MODULE)
- DMA control
- I/O expansion
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- Boolean function generators
- Code converters
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Complex programmable logic devices
