XCR3128XL-7VQ100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3128XL |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3000 |
| Max Frequency | 119MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3128XL-7VQ100C Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 100-TQFP package.This device has 84 I/O ports programmed into it.There are 100 terminations programmed into the device.The terminal position of this electrical component is QUAD.Power is provided by a supply voltage of 3.3V volts.This part is in the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of CoolRunner XPLA3series FPGA.There are 100 pins on the chip.This device also displays [0].The XCR3128XLcan be used to identify its related parts.For digital circuits, there are 3000gates. These devices serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.100pins are included in its design.In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.It is recommended that the maximal frequency be lower than 119MHz.There are 8 logic elements/cells to form a fundamental building block.
XCR3128XL-7VQ100C Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
XCR3128XL-7VQ100C Applications
There are a lot of Xilinx Inc. XCR3128XL-7VQ100C CPLDs applications.
- Programmable polarity
- Programmable power management
- Boolean function generators
- Synchronous or asynchronous mode
- Bootloaders for FPGAs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- DDC INTERFACE
- ON-CHIP OSCILLATOR CIRCUIT
- Software-driven hardware configuration
- Cross-Matrix Switch
