XCR3256XL-10PQ208C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Max Frequency | 105MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
XCR3256XL-10PQ208C Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 208-BFQFP package.As you can see, this device has 164 I/O ports programmed into it.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.It is a part of family [0].It is recommended to package the chip by Bulk.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.FPGAs belonging to the CoolRunner XPLA3series contain this type of chip.A chip with 208pins is programmed.When using this device, YEScan also be found.A digital circuit can be constructed using 6000gates.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].208pins are included in its design.A logic element or block has 16elements.3.6Vis the maximum supply voltage (Vsup).Ideally, the maximal frequency should be lower than 105MHz Hz.
XCR3256XL-10PQ208C Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
XCR3256XL-10PQ208C Applications
There are a lot of Xilinx Inc. XCR3256XL-10PQ208C CPLDs applications.
- INTERRUPT SYSTEM
- Address decoding
- Field programmable gate
- ROM patching
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I2C BUS INTERFACE
- Multiple DIP Switch Replacement
- Parity generators
- State machine control
- Software Configuration of Add-In Boards
