XCR3256XL-10PQ208I
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Max Frequency | 105MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
XCR3256XL-10PQ208I Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].It is programmed with 164 I/Os.It is programmed that device terminations will be 208 .This electrical component has a terminal position of 0.There is 3.3V voltage supply for this device.It is a part of family [0].Bulkis the packaging method.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the CoolRunner XPLA3 series.Chips are programmed with 208 pins.This device also displays [0].The 6000gates serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.It is recommended to store data in [0].This board has 208 pins.16logic blocks/elements are present.Initially, the maximum supply voltage (Vsup) is 3.6V.It is important to make sure that the maximum frequency is less than 105MHz.
XCR3256XL-10PQ208I Features
208-BFQFP package
164 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
XCR3256XL-10PQ208I Applications
There are a lot of Xilinx Inc. XCR3256XL-10PQ208I CPLDs applications.
- Digital designs
- Portable digital devices
- STANDARD SERIAL INTERFACE UART
- Voltage level translation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Bootloaders for FPGAs
- D/T registers and latches
- Pattern recognition
- POWER-SAVING MODES
- Programmable power management
