XCR3256XL-10TQG144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6000 |
| Max Frequency | 105MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
XCR3256XL-10TQG144C Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].In this case, there are 120 I/Os programmed.It is programmed that device terminations will be 144 .The terminal position of this electrical component is QUAD.The power source is powered by 3.3Vvolts.This part is part of the family [0].Trayis the packaging method.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.The CoolRunner XPLA3series comprises this type of FPGA.Chips are programmed with 144 pins.If this device is used, you will also be able to find [0].It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In order to store data, EEPROMis used.The electronic component is mounted by Surface Mount.It is designed with 144 pins.It operates with the maximal supply voltage of 3.6V.In order for it to operate, a supply voltage of 3Vis required.It is recommended that the maximum frequency be less than 105MHz.There are 16 logic elements/cells on the device.
XCR3256XL-10TQG144C Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
XCR3256XL-10TQG144C Applications
There are a lot of Xilinx Inc. XCR3256XL-10TQG144C CPLDs applications.
- LED Lighting systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Random logic replacement
- Software Configuration of Add-In Boards
- STANDARD SERIAL INTERFACE UART
- Preset swapping
- Software-Driven Hardware Configuration
- Multiple Clock Source Selection
- Programmable polarity
- D/T registers and latches
