XCR3256XL-12FTG256I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6000 |
| Max Frequency | 88MHz |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 10.8ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
XCR3256XL-12FTG256I Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a 256-LBGA package.In this case, there are 164 I/Os programmed.The termination of a device is set to [0].This electrical part is wired with a terminal position of BOTTOM.Power is supplied by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.It is packaged in the way of Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.In terms of FPGAs, it belongs to the CoolRunner XPLA3 series.With 256pins programmed, the chip is ready to use.It is also possible to find YESwhen using this device.As a building block for digital circuits, there are 6000gates.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.Supply voltage (Vsup) reaches a maximum of 3.6V.It should be below 88MHzat the maximal frequency.The fundamental building block consists of 16logic elements/cells.
XCR3256XL-12FTG256I Features
256-LBGA package
164 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
XCR3256XL-12FTG256I Applications
There are a lot of Xilinx Inc. XCR3256XL-12FTG256I CPLDs applications.
- Power up sequencing
- Configurable Addressing of I/O Boards
- Digital systems
- STANDARD SERIAL INTERFACE UART
- D/T registers and latches
- Multiple DIP Switch Replacement
- Interface bridging
- Programmable power management
- Power automation
- Field programmable gate
