XCR3256XL-12PQ208C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Bulk |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 6000 |
| Max Frequency | 88MHz |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10.8ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
XCR3256XL-12PQ208C Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 208-BFQFP package containing it.This device has 164 I/O ports programmed into it.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.There is 3.3V voltage supply for this device.The part belongs to Programmable Logic Devices family.Package the chip by Bulk.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the CoolRunner XPLA3 series.The chip is programmed with 208 pins.When using this device, YEScan also be found.The 6000gates serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In order to store data, EEPROMis used.The 208pins are designed into the board.A total of 16logic elements/blocks are present.In this case, the maximum supply voltage (Vsup) is 3.6V.It is important to make sure that the maximum frequency is less than 88MHz.
XCR3256XL-12PQ208C Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
XCR3256XL-12PQ208C Applications
There are a lot of Xilinx Inc. XCR3256XL-12PQ208C CPLDs applications.
- Timing control
- Interface bridging
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Cross-Matrix Switch
- DMA control
- Multiple Clock Source Selection
- Software-driven hardware configuration
- D/T registers and latches
- Multiple DIP Switch Replacement
- Programmable polarity
