XCR3256XL-7PQG208C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 164 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6000 |
| Max Frequency | 154MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | ROHS3 Compliant |
XCR3256XL-7PQG208C Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.208-BFQFPis the package in which it resides.The device is programmed with 164 I/O ports.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.The power supply voltage is 3.3V.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the CoolRunner XPLA3 series.It has 208pins programmed.If you use this device, you will also find [0].It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For storing data, it is recommended to use [0].It is mounted by Surface Mount.It is designed with 208 pins.A maximum supply voltage of 3.6Vis used in its operation.The minimal supply voltage is 3V.It is important to make sure that the maximum frequency is less than 154MHz.There are 16 logic elements/cells on the device.
XCR3256XL-7PQG208C Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
XCR3256XL-7PQG208C Applications
There are a lot of Xilinx Inc. XCR3256XL-7PQG208C CPLDs applications.
- Handheld digital devices
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- TIMERS/COUNTERS
- I2C BUS INTERFACE
- Interface bridging
- Code converters
- Boolean function generators
- Software-driven hardware configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
