XCR3256XL-7TQG144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6000 |
| Max Frequency | 154MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
XCR3256XL-7TQG144C Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 144-LQFP package containing it.There are 120 I/Os on the board.It is programmed that device terminations will be 144 .This electrical component has a terminal position of 0.The device is powered by a voltage of 3.3V volts.It is a part of the family [0].Trayis the packaging method.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.The FPGA belongs to the CoolRunner XPLA3 series.In this chip, the 144pins are programmed.It is also possible to find YESwhen using this device.In digital circuits, 6000gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In general, it is recommended to store data in [0].This device is mounted by Surface Mount.There are 144 pins on the device.A maximum supply voltage (Vsup) of 3.6V is provided.It is important to make sure that the maximum frequency is less than 154MHz.There are 16 logic elements/cells on the device.
XCR3256XL-7TQG144C Features
144-LQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
XCR3256XL-7TQG144C Applications
There are a lot of Xilinx Inc. XCR3256XL-7TQG144C CPLDs applications.
- Digital designs
- I/O PORTS (MCU MODULE)
- Custom state machines
- Random logic replacement
- POWER-SAVING MODES
- Battery operated portable devices
- Code converters
- Synchronous or asynchronous mode
- Interface bridging
- Address decoding
