XCR3384XL-10TQ144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 118 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 9000 |
| Max Frequency | 102MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
XCR3384XL-10TQ144I Overview
There are 384 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 144-LQFP package contains the item.The device is programmed with 118 I/Os.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 3.3V is used to power it.The part is included in Programmable Logic Devices.As a result, it is packaged as Bulk.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In FPGA terms, it is a type of CoolRunner XPLA3series FPGA.It is equipped with 144 pin count.This device can also display [0].There are 9000 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.A total of 144pins are provided on this board.24logic elements/blocks exist.3.6Vrepresents the maximal supply voltage (Vsup).Ideally, the maximal frequency should be lower than 102MHz Hz.
XCR3384XL-10TQ144I Features
144-LQFP package
118 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
XCR3384XL-10TQ144I Applications
There are a lot of Xilinx Inc. XCR3384XL-10TQ144I CPLDs applications.
- Power up sequencing
- STANDARD SERIAL INTERFACE UART
- Preset swapping
- Cross-Matrix Switch
- Portable digital devices
- DMA control
- State machine design
- Programmable power management
- Storage Cards and Storage Racks
- INTERRUPT SYSTEM
