XCR3384XL-10TQG144C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 118 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 24 |
| Number of Gates | 9000 |
| Max Frequency | 102MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 9ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
XCR3384XL-10TQG144C Overview
The mobile phone network has 384 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with 144-LQFP.This device has 118 I/O ports programmed into it.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.Power is supplied by a voltage of 3.3V volts.This part is part of the family [0].Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of CoolRunner XPLA3series FPGA.There are 144 pins on the chip.When using this device, YEScan also be found.As a building block for digital circuits, there are 9000gates.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For data storage, EEPROMis adopted.A Surface Mountis mounted on this electronic component.144pins are included in its design.A maximum supply voltage (Vsup) of 3.6V is provided.The maximum frequency should not exceed 102MHz.The fundamental building block consists of 24logic elements/cells.
XCR3384XL-10TQG144C Features
144-LQFP package
118 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
XCR3384XL-10TQG144C Applications
There are a lot of Xilinx Inc. XCR3384XL-10TQG144C CPLDs applications.
- State machine control
- Power up sequencing
- POWER-SAVING MODES
- STANDARD SERIAL INTERFACE UART
- Address decoders
- Auxiliary Power Supply Isolated and Non-isolated
- Programmable polarity
- Interface bridging
- Protection relays
- Parity generators
