XCR3512XL-10FT256I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Surface Mount | YES |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 12000 |
| Max Frequency | 97MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
XCR3512XL-10FT256I Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 256-LBGA package.This device has 212 I/O ports programmed into it.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 3.3V volts.It is a part of the family [0].Bulkshould be used to package the chip.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the CoolRunner XPLA3 series.256pins are programmed on the chip.Additionally, this device is capable of displaying [0].12000gates are devices that serve as building blocks for digital circuits.Optimal efficiency requires a supply voltage of [0].It is adopted to store data in [0].This board has 256 pins.A total of 32logic elements/blocks are present.The maximal supply voltage (Vsup) reaches 3.6V.It is recommended that the maximal frequency be lower than 97MHz.
XCR3512XL-10FT256I Features
256-LBGA package
212 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
XCR3512XL-10FT256I Applications
There are a lot of Xilinx Inc. XCR3512XL-10FT256I CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
- Storage Cards and Storage Racks
- Custom state machines
- INTERRUPT SYSTEM
- ROM patching
- Preset swapping
- Software Configuration of Add-In Boards
- STANDARD SERIAL INTERFACE UART
- Configurable Addressing of I/O Boards
