XCR3512XL-10PQ208I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 180 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 12000 |
| Max Frequency | 97MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
XCR3512XL-10PQ208I Overview
There are 512 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 208-BFQFP package.In this case, there are 180 I/Os programmed.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.A voltage of 3.3V is used as the power supply for this device.It is a part of the family [0].It is recommended to package the chip by Bulk.Ensure its reliability by operating at [0].The chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the CoolRunner XPLA3 series.In this chip, the 208pins are programmed.It is also possible to find YESwhen using this device.A digital circuit can be constructed using 12000gates.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This logic block consists of 32logic elements.A maximum supply voltage (Vsup) of 3.6V is provided.It is recommended that the maximal frequency be lower than 97MHz.
XCR3512XL-10PQ208I Features
208-BFQFP package
180 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
XCR3512XL-10PQ208I Applications
There are a lot of Xilinx Inc. XCR3512XL-10PQ208I CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Protection relays
- USB Bus
- Synchronous or asynchronous mode
- Digital multiplexers
- Page register
- I2C BUS INTERFACE
- Address decoding
- Field programmable gate
- Reset swapping
