XCR3512XL-12FTG256C
| Parameters | |
|---|---|
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Gates | 12000 |
| Max Frequency | 77MHz |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10.8ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
XCR3512XL-12FTG256C Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 256-LBGA package.The device is programmed with 212 I/Os.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 3.3V is used to power it.It is included in Programmable Logic Devices.It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.The FPGA belongs to the CoolRunner XPLA3 series.It is programmed with 256 pins.If this device is used, you will also be able to find [0].It is possible to construct digital circuits using 12000gates, which are devices that serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.There are 256pins on it.The maximal supply voltage (Vsup) reaches 3.6V.There should be a lower maximum frequency than 77MHz.As a fundamental building block, there are 32 logic elements/cells.
XCR3512XL-12FTG256C Features
256-LBGA package
212 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
256 pins
XCR3512XL-12FTG256C Applications
There are a lot of Xilinx Inc. XCR3512XL-12FTG256C CPLDs applications.
- I2C BUS INTERFACE
- ROM patching
- Bootloaders for FPGAs
- Power up sequencing
- Programmable power management
- White goods (Washing, Cold, Aircon ,...)
- Multiple Clock Source Selection
- Battery operated portable devices
- Software Configuration of Add-In Boards
- Complex programmable logic devices
