XCR3512XL-12FTG256I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 212 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Gates | 12000 |
| Max Frequency | 77MHz |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 10.8ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
XCR3512XL-12FTG256I Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 256-LBGA package.There are 212 I/Os programmed in it.There is a 256terminations set on devices.This electrical component has a terminal position of 0.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.As part of the CoolRunner XPLA3series, it is a type of FPGA.There are 256pins on the chip.If you use this device, you will also find [0].It is possible to construct digital circuits using 12000gates, which are devices that serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.There are 256 pins on the device.A maximum supply voltage (Vsup) of 3.6V is provided.It is recommended that the maximum frequency be less than 77MHz.Fundamental building blocks consist of 32logic elements/cells.
XCR3512XL-12FTG256I Features
256-LBGA package
212 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
XCR3512XL-12FTG256I Applications
There are a lot of Xilinx Inc. XCR3512XL-12FTG256I CPLDs applications.
- Custom shift registers
- ToR/Aggregation/Core Switch and Router
- I2C BUS INTERFACE
- DDC INTERFACE
- Custom state machines
- Auxiliary Power Supply Isolated and Non-isolated
- ROM patching
- Cross-Matrix Switch
- ON-CHIP OSCILLATOR CIRCUIT
- Dedicated input registers
