banner_page

XQ17V16VQ44N

Configuration Proms for FPGAs 3 not_compliant


  • Manufacturer: Xilinx
  • Nocochips NO: 903-XQ17V16VQ44N
  • Package: -
  • Datasheet: -
  • Stock: 285
  • Description: Configuration Proms for FPGAs 3 not_compliant (Kg)

Details

Tags

Parameters
Surface Mount YES
Number of Pins 44
JESD-609 Code e0
Pbfree Code no
Moisture Sensitivity Level (MSL) 3
Number of Terminations 44
ECCN Code 3A001.A.2.C
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.32.00.51
Subcategory OTP ROMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44
Qualification Status Not Qualified
Operating Temperature (Max) 125°C
Operating Temperature (Min) -55°C
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Temperature Grade MILITARY
Supply Voltage-Min (Vsup) 3V
Operating Mode SYNCHRONOUS
Clock Frequency 33MHz
Supply Current-Max 0.1mA
Organization 2MX8
Output Characteristics 3-STATE
Memory Width 8
Standby Current-Max 0.001A
Memory Density 16777216 bit
Access Time (Max) 20 ns
Parallel/Serial PARALLEL/SERIAL
I/O Type COMMON
Memory IC Type CONFIGURATION MEMORY
Height Seated (Max) 1.2mm
Length 10mm
Width 10mm
RoHS Status Non-RoHS Compliant

XQ17V16VQ44N Overview


The supply voltage of the device must be 3.3V in order to operate correctly.FPGA is possible to connect different functions on the 44 axis at different terminations.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.If the device needs to be supplied with power, then a minimum voltage of 3V is required.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at no higher than 225 degrees.There are 44 pins on it.In this memory, data is transmitted using the PARALLEL/SERIAL process.The memory chip is allowed to operate at a voltage that is no greater than 0.1mA.There is a set of 44 pins that are included with the part.Speaking of speed, this is a memory IC that can work at a 33MHz frequency.There is a COMMON configuration for the memory's I/O.In order to obtain the best performance, it is recommended to use a 3.3V power supply.In specific, it can be described as a form of OTP ROMs.

XQ17V16VQ44N Features


CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
COMMON I/O equipped.

XQ17V16VQ44N Applications


There are a lot of Xilinx XQ17V16VQ44N applications of configuration proms for FPGAs.

  • mainframes
  • supercomputers
  • DVD disk buffer
  • Cache memory
  • nonvolatile BIOS memory
  • eDRAM
  • personal computers
  • eSRAM
  • hard disk drive (HDD)
  • graphics card

Write a review

Note: HTML is not translated!
    Bad           Good