XR16L2751IM-F

3.3V V 1.2mm mm 7mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 7mm mm 8 CMOS 48 260

Manufacturer: MaxLinear, Inc.
Nocochips NO: 493-XR16L2751IM-F
Package: 48-TQFP
Datasheet: PDF
Stock: 954
Description: 3.3V V 1.2mm mm 7mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 7mm mm 8 CMOS 48 260 (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	48-TQFP
Surface Mount	YES
Packaging	Tray
JESD-609 Code	e3
Feature	Internal Oscillator, Timer/Counter
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	48
Terminal Finish	Matte Tin (Sn)
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	2.25V~5.5V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
JESD-30 Code	S-PQFP-G48
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
Number of I/O	8
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	50MHz
Supply Current-Max	5mA
Address Bus Width	4
Protocol	RS232, RS485
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	6.25Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.78125 MBps
Data Encoding/Decoding Method	NRZ
FIFO's	64 Byte
With False Start Bit Detection	Yes
Height Seated (Max)	1.2mm
Length	7mm
Width	7mm
RoHS Status	RoHS Compliant

XR16L2751IM-F Overview

UART is available in the cost-effective 48-TQFP package.Transmission is done through 2, DUART channels.As far as packaging is concerned, Tray is used.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.In its configuration, 48 terminations are used.For its operation, a voltage of 3.3V is provided as the supply voltage.As of right now, this electronic part is in a Active status.As a means of communicating data, there are 2 serial I/Os available.The mount can be accessed via the Surface Mount method.2.25V~5.5V supply voltage is required to operate it.There is 50MHz clock frequency measured on this IC.In some ways, it resembles Internal Oscillator, Timer/Counter.Operating at 85°C is its maximum temperature limit.A minimum temperature of -40°C is required to operate it.In total, there are 8 I/Os designed to transfer data.Supply currents above 5mA are acceptable.