XR16L2752CJ-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.25V |
| Nominal Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Data Rate | 6.25 Mbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XR16L2752CJ-F Overview
In addition, it is available in the cost-effective package PLCC.Transmissions are made using 2 channels.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 44 terminations are used.In order for it to operate, a voltage of 5V must be provided.Data communication is supported by 2 serial I/Os.This device is an integrated circuit with 44 pins.IC clock frequency is set to 50MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.The operating temperature should not exceed 0°C to ensure normal work for a long time.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 70°C.As its configuration basis, the 44 pins are used.Using the Surface Mount method, it is mounted.As long as the supply voltage is kept below 5.5V, reliability can be ensured.Supply voltages above 2.25V are known to ensure reliability.
XR16L2752CJ-F Features
2 serial I/Os
Clock frequency of 50MHz
XR16L2752CJ-F Applications
There are a lot of Exar Corporation XR16L2752CJ-F UARTs applications.
- Factory automation and process control
- Communications equipment
- DTE for Modem Communication Systems
- Point-of-Sale Systems
- Personal Digital Assistants
- GPS Devices
- Handheld Terminals and Tablets
- Handheld Computers
- Wireless Infrared Data Communications Systems
- Portable and battery operated devices
