XR16M2750IM48-F

3.3V V 7mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 7mm mm CMOS 48 260 48

Manufacturer: Exar Corporation
Nocochips NO: 3417-XR16M2750IM48-F
Package: TQFP
Datasheet: -
Stock: 148
Description: 3.3V V 7mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 7mm mm CMOS 48 260 48 (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	TQFP
Number of Pins	48
JESD-609 Code	e3
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	3
Number of Terminations	48
Terminal Finish	Matte Tin (Sn)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Serial IO/Communication Controllers
Technology	CMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Pin Count	48
Qualification Status	Not Qualified
Power Supplies	1.8/3.3V
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.62V
Nominal Supply Current	2.5mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	64MHz
Data Rate	8 Mbps
Address Bus Width	3
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	1
Data Transfer Rate-Max	1 MBps
Communication Protocol	ASYNC, BIT
Length	7mm
Width	7mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

XR16M2750IM48-F Overview

The package TQFP offers the best value.The transmission of data takes place over 2 channels.The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 48 terminations are used.This device is powered by a voltage of 3.3V.As a means of transferring data, there are 1 serial I/Os.There are 48 pins on this electronic device.There is a 64MHz clock frequency for this IC.This item is classified as Serial IO/Communication Controllers due to a number of similarities.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The 48 pins form the basis for its configuration.Surface Mount is used for mounting it.Keeping the supply voltage below 3.6V will ensure reliability.By maintaining the supply voltage above 1.62V, reliability can be assured.In the case of 1.8/3.3V power supplies, it is reliable and efficient to use by electronic designers.