XR16M752IM48-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.62V |
| Memory Size | 64B |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 2mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 64MHz |
| Data Rate | 16 Mbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Communication Protocol | ASYNC, BIT |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XR16M752IM48-F Overview
The TQFP package is the most cost-effective.The transmission is conducted over 2 channels.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.In order to configure this device, 48 terminations are used.The device operates at 3.3V voltage.There are 2 serial I/Os available for communication of data.In this case, the electronic device is a type of integrated circuit with 48 pins.The clock frequency of this IC is measured at 64MHz.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above 85°C.A configuration of the chip is determined by its 48 pins.The mount is done using Surface Mount.Keeping the supply voltage below 3.6V can ensure that reliability will be preserved in the system.By maintaining the supply voltage above 1.62V, reliability can be assured.When power supplies are provided of 1.8/3.3V, it is reliable and efficient for electronic designers.Universal asynchronous receiver-transmitter uses 1mA as the supply current, which is suUniversal asynchronous receiver-transmitterable for a specific application.There is a lot of information stored in the memory with a size of 64B.
XR16M752IM48-F Features
2 serial I/Os
Clock frequency of 64MHz
Power supplies of 1.8/3.3V
XR16M752IM48-F Applications
There are a lot of Exar Corporation XR16M752IM48-F UARTs applications.
- GPS Systems
- Handheld Terminals and Tablets
- Factory Automation
- Point-of- Sale Terminals
- DTE for Modem Communication Systems
- Factory automation and process control
- Gaming Terminals
- Ethernet Network Routers
- Cellular Data
- Domestic Applications
