XR20M1170IG16
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.62V |
| Nominal Supply Current | 500μA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, I2C BUS |
| Clock Frequency | 24MHz |
| Data Rate | 16 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 8 |
| Data Transfer Rate-Max | 2 MBps |
| Communication Protocol | I2C |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
XR20M1170IG16 Overview
In order to make it more cost-effective, this product is also available in a package of TSSOP.There are 1 channels used for transmission.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, I2C BUS.The configuration uses 16 terminations.In order to operate it, a supply voltage of 3.3V is required.Data is communicated via 8 serial I/Os.There are 16 pins on this electronic device.The clock frequency of this IC is measured at 24MHz.This item is classified as Serial IO/Communication Controllers due to a number of similarities.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.16 pins are designed to form the basis of its configuration.The way of mounting it is Surface Mount.Keeping the supply voltage below 3.6V will ensure reliability.In order to maintain reliability, the supply voltage should be kept above 1.62V.
XR20M1170IG16 Features
8 serial I/Os
Clock frequency of 24MHz
XR20M1170IG16 Applications
There are a lot of Exar Corporation XR20M1170IG16 UARTs applications.
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Portable Applications
- GPS Systems
- Personal Digital Assistants Modules
- Communications equipment
- Multi-port RS-232/RS-422/RS-485 Cards
- White goods
- Cellular Data
- GPS Devices
- Router C ontrol
