XR71211EHMTR-F

10-Pin DC to DC converter IC800kHz Adjustable

Manufacturer: Exar Corporation
Nocochips NO: 3417-XR71211EHMTR-F
Package: DFN
Datasheet: PDF
Stock: 782
Description: 10-Pin DC to DC converter IC800kHz Adjustable (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	DFN
Number of Pins	10
Packaging	Cut Tape
ECCN Code	EAR99
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Output Type	Adjustable
Max Output Current	3.5mA
Output Configuration	Positive
Current - Output	1.5A
Max Output Voltage	2.4V
Voltage - Output	2.4V
Min Input Voltage	1.4V
Frequency - Switching	800kHz
Max Input Voltage	2.625V
Synchronous Rectifier	Yes
Dropout Voltage	250mV
Min Output Voltage	600mV
Clock Sync	No
Number of Output Phases	1
Height	900μm
Length	3mm
Width	3mm
REACH SVHC	Unknown
RoHS Status	RoHS Compliant

XR71211EHMTR-F Overview

Capsuled in the DFN package, the switching controller can be used for a wide range of applications. Packaging for the pmic consists of Cut Tape solid enclosures. With this function, you can deal with Adjustable dc switching's outputs (s). The switching controller is capable of switching at the 800kHz position. Total pins of switching converter are 10. The Surface Mount makes DC switcher suitable for most applications and prototypes. You should keep dc regulator at -40°C degrees or higher. There should be 125°C temperature above 125°C degrees Celsius when dc regulator runs. The maximum input voltage of this dc switcher is 2.625V, so users must limit the voltage accordingly. Ideally, it is suited for switching controllers with a 1.5A input. When it is working normally, it outputs a value of 2.4V. There must be a 1.4V supply voltage. A dc switcher can only produce an output current of 3.5mA. The switching converter can output 2.4V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 600mV. With this controller, the phase is 1.