XRP2525ID-1-F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 900mA |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 900mA |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 52μA |
| Output Configuration | High Side |
| Adjustable Threshold | NO |
| Turn On Delay Time | 2 ms |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 22 μs |
| Fault Protection | Over Temperature, Reverse Current |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XRP2525ID-1-F Overview
As part of the SOIC package, it is included.Hot-swappable device is currently possible to access 1 channels.The terminations total 8.DUAL is the terminal position of the device.In total, it has 8 pins.With a supply voltage of 5V, high efficiency is possible.In order to operate, 8 pins are used.Despite its self-contained nature, Power Management Circuits is a very compact device.Surface Mount is its direction of movement.Hot-swappable device is stable to operate at a temperature of 85°C°C at the maximum.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is 2/5V type power supplies that are used in this part.There is a POWER SUPPLY SUPPORT CIRCUIT IC in this gadget, which is an analog IC.By default, it produces output 1.An input voltage of 5.5VV is the maximum it can handle.As low a supply voltage as possible, such as 1.8VV, is possible.Hot Swap is necessary to reduce the maximum output current to 900mA in order to meet the operation crHot Swaperia.Hot Swap has 140MOhm resistance.
XRP2525ID-1-F Features
The terminal position of 8
XRP2525ID-1-F Applications
There are a lot of Exar Corporation XRP2525ID-1-F hot swap controllers applications.
- Distributed power systems
- Datacom
- Industrial high-side switches
- Solid state circuit breakers
- Current monitor output
- Comprehensive analog and digital capabilities
- High power circuit board
- Circuit breakers for high-side circuits
- Automatic restart after load failure
- Base station power distribution system
