Z16C3510VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Packaging | Tube |
| Published | 1999 |
| Series | IUSC™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GP I/OS; 10 X 19 FRAME STATUS FIFO; 32 BIT ADDRESSING CAPABILITY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z16C35 |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | USB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 50mA |
| Address Bus Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 16 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.5 MBps |
| Number of DMA Channels | 4 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 24.2316mm |
| Width | 24.2316mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z16C3510VSC Overview
This fits well into the 68-LCC (J-Lead) package.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.There is the potential for the device to supply 4.75V~5.25V volts.By using the [0], it is possible to find parts that are related.The terminations on it are [0].This device should be set to 5V.In total, it consists of 68pins.Operation is performed via the 68pins.Surface Mountmounts it.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.Keeping 70°Cas the maximum value will ensure consistency.This electronic component belongs to the family of [0].Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.It belongs to the IUSC?series.Voltage at 5Vcan be delivered by the device.The device can also be used to find [0].Performance requires that the output frequency of the device not exceed 10MHz.In the interface IC, there are 2 serial inputs or outputs.
Z16C3510VSC Features
It is based on Z16C35.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z16C3510VSC Applications
There are a lot of Zilog Z16C3510VSC Specialized Interface ICs applications.
- Precision instrumentation
- Data Acquisition Systems
- Ultrasound
- PCMCIA cards
- Audio and video switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Modems
- CSU/DSUs
- E1 Multiplexer
- SONET/SDH ADM
