Z16F2811FI20SG
| Parameters | |
|---|---|
| Published | 2011 |
| Series | Encore!® ZNEO |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 550mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Base Part Number | Z16F2811 |
| Pin Count | 80 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | EBI/EMI, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 60 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | ZNEO |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | EBI/EMI, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 35mA |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 24 |
| ROM (words) | 131072 |
| Height Seated (Max) | 3.18mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 80-BQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
Z16F2811FI20SG Overview
A space-saving advantage is that it is included in the 80-BQFP package. This is mounted using the Surface Mount method. Package Tray contains it. It is equipped with a ZNEO core processor. When working, the temperature should be kept at 0°C~70°C TA. The type of memory in which this program is stored is FLASH. A total of 60 I/Os are available on this device. To find equivalent components, use its Z16F2811 base part number. A QUAD position is assigned to its terminals. It has 80 terminationals. The Encore!? ZNEO series includes this electrical component. By using a 3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 80 pins are required to construct this device. There are 80 pins on it. It belongs to the subcategory Microcontrollers. A device with a memory size of 128kB can store programs and data. The maximum supply current is set at 35mA. Powered by a 3/3.3V source. It performs extremely well at a frequency of 20MHz. 4 timers/counters are in use. During normal operation, the supply voltage (Vsup) should be kept above 2.7V. Using an oscillator type Internal, it operates.
Z16F2811FI20SG Features
80-BQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
Z16F2811FI20SG Applications
There are a lot of Zilog Z16F2811FI20SG Microcontroller applications.
- Projector
- Heart rate monitors
- Smart instruments
- Oscilloscopes
- Temperature sensing and controlling devices
- Vacuum cleaners
- Accu-check
- Auto-breaking system
- Electronic jamming systems
- Walkie talkies
