Z8018110FEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 100-QFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z80181 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Voltage | 5V |
| Interface | UART |
| Memory Size | 1MB |
| Number of I/O | 16 |
| Memory Type | ROMless |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | Z80180 |
| Supply Current-Max | 80mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Voltage - I/O | 5.0V |
| Number of Cores/Bus Width | 1 Core 8-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | ASCI, CSIO, SCC, UART |
| Number of Serial I/Os | 3 |
| Number of External Interrupts | 4 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 3.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8018110FEG Overview
The embedded microprocessor has been packed in 100-QFP for convenient overseas shipping. High reliability is achieved with advanced packaging method Tray. There are 1 Core 8-Bit cores/bus width on the CPU. The operating temperature around -40°C~100°C TA should be understood. This is a member of the SAC? series. Z80180 is the processor core of this CPU. DRAM RAM controllers are used by this CPU. Microprocessors with ASCI, CSIO, SCC, UART interfaces are designed to serve users better. The CPU runs I/O at 5.0V. I would rate this as a MICROCONTROLLER for the uPs/uCs/Peripheral ICs type. Using Z80181 will help you find variants of the cpu microprocessor. As a whole, there are 100 terminations. Using a 5V voltage supply, the microprocessor should turn on and run. The architecture of the microprocessor is 8-bit. A 10MHz frequency is used by the CPU. The datasheets for 100 pins provide details. It is important to note that there is 8b bandwidth available for data transfer. The CPU microprocessor body is injected with 100 pins. Many applications make use of this CPU, which has Surface Mount mounted. There is a 5V function for the micro processor. There is 5V voltage at the CPU core. There is a maximum voltage you can supply to the CPU of 80mA. CPU programs transfer data via 16 I/Os. The CPU has memory sized 1MB. The CPU's idle time can be determined by 2 counters. Hardware interrupts can be dealt with by terminating 4 external interrupts. Serial I/Os have been set to communicate data between peripherals through 3. The Direct Memory Access (DMA) process is programmed with 2 channels.
Z8018110FEG Features
Z80180 Core
8-Bit Structure
8b-Bit Data Bus Width
16 I/Os
Z8018110FEG Applications
There are a lot of Zilog Z8018110FEG Microprocessor applications.
- Nintendo
- Coffee machines
- Removable disks
- Computed Tomography (CT scan)
- DDC control
- Computer/laptop
- Speed meter
- Traditional industrial transformation
- Consumer electronics products
- Communication-bluetooth, Wi-Fi, radio
