Z8023010PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Weight | 5.953513g |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | Z80230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8023010PSG Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for it.A case of Tubeis provided.In the way of [0], this component is installed.It is possible to obtain devices that supply 4.5V~5.5V volts.The Z80230can be used to locate related parts.There are 40 terminations on it.Make sure this device is set to 5V.In total, it contains 40pins.Operation is performed via the 40pins.By [0], it is mounted.As a result, the device operates at a minimum working temperature of 0°Cto ensure its reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.Electronic components from the family Other Microprocessor ICsare used.The interface IC conducts at a voltage of 5V.This device supports SERIAL IO/COMMUNICATION CONTROLLER, SERIALuPs/uCs/peripheral ICs.The electronic part in question belongs to the IUSC? series.The device is capable of delivering voltage at 5V.As a result of using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.It is capable of achieving good efficiency when functioning at a frequency of 10MHz.The interface IC has 2serial I/Os that can be used to connect to the computer.
Z8023010PSG Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z8023010PSG Applications
There are a lot of Zilog Z8023010PSG Specialized Interface ICs applications.
- Signal routing between systems
- Optical Applications
- Avionics
- RGB switches
- Cable Modem, Cable PC
- ?Remote wireless modules
- ?Microwave transmission systems
- Digital Cross-Connects
- Switching Systems
- Video signal routing
