banner_page

Z8023010VSC

1.27mm 5V Specialized Interface IC IUSC? Series Z80230 44 Pin 10MHz 5V 44-LCC (J-Lead)


  • Manufacturer: Zilog
  • Nocochips NO: 899-Z8023010VSC
  • Package: 44-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 528
  • Description: 1.27mm 5V Specialized Interface IC IUSC? Series Z80230 44 Pin 10MHz 5V 44-LCC (J-Lead) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 44-LCC (J-Lead)
Number of Pins 44
Weight 2.386605g
Packaging Tube
Published 2007
Series IUSC™
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO
HTS Code 8542.31.00.01
Subcategory Other Microprocessor ICs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 10MHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number Z80230
Pin Count 44
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Interface Bus
Operating Supply Current 5mA
uPs/uCs/Peripheral ICs Type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Supply Current-Max 12mA
Address Bus Width 8
Boundary Scan NO
Low Power Mode NO
External Data Bus Width 8
Number of Serial I/Os 2
Data Transfer Rate-Max 0.3125 MBps
Communication Protocol ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC
Data Encoding/Decoding Method NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER)
Height Seated (Max) 4.57mm
Length 16.5862mm
Width 16.5862mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

Z8023010VSC Overview


The 44-LCC (J-Lead)package is a good fit for this feature.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.The device is capable of supplying voltages of 4.5V~5.5V volts.Using the Z80230you can find related parts.The number of terminations is 44.Make sure that this device is set to 5V.44pins are on it in total.In order to operate, the 44pins are used.The device is mounted by Surface Mount.It operates at a minimum working temperature of 0°C to ensure reliability.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.The electronic components belong to the Other Microprocessor ICs family.It is designed to operate at 5V supply voltage, with the interface IC conducting at this voltage.There are SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/Peripheral ICs integrated into this device.An electronic part of the series IUSC?is being used in this application.The device is capable of delivering voltage at 5V.Using this device, it is also possible to establish [0].A frequency of 10MHzenables it to achieve good efficiency.Currently, it has 2serial I/O ports.

Z8023010VSC Features


It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2

Z8023010VSC Applications


There are a lot of Zilog Z8023010VSC Specialized Interface ICs applications.

  • Cell phones
  • AD7840/8, AD7870/1/2/4/5/6/8
  • Data Acquisition Systems
  • PCMCIA cards
  • ?Microwave transmission systems
  • Medical Instrumentation
  • Signal routing between systems
  • Multiplexers
  • Microprocessor controlled systems
  • Public switching systems and PBX interfaces

Write a review

Note: HTML is not translated!
    Bad           Good