Z8023010VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z80230 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.3125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8023010VSG Overview
The 44-LCC (J-Lead)package is a good fit for it.A case of Tubeis provided.The component is installed in the way indicated by Surface Mount.The device is capable of supplying 4.5V~5.5V volts.Using the Z80230you can find related parts.In total, there are 44terminations.Make sure this device is set to 5V.In total, there are 44pins on the board.In order to operate, the 44pins are used.Surface Mountmounts it.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.In order to maintain consistency, a maximum value of 70°Cis recommended.In this case, the electronic components are from the Other Microprocessor ICs family.It is assumed that the interface IC conducts when its supply voltage is 5V.The uPs/uCs/Peripheral IC this device incoporates is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The electronic part is part of the IUSC? series.It is capable of delivering voltage at 5V.As a result of using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.When operating at a frequency of [0], it is capable of achieving good performance.The interface IC has 2serial I/O ports.
Z8023010VSG Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z8023010VSG Applications
There are a lot of Zilog Z8023010VSG Specialized Interface ICs applications.
- Power routing
- Precision instrumentation
- Data switching
- T1/E1 Terminals
- Cable Modem, Cable PC
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- CSU/DSUs
- Microprocessor controlled systems
- PDAs
- Residential Gateways, Home Gateway/Router
