Z8023016PSC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Weight | 5.953513g |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z80230 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8023016PSC Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for this feature.The package contains a Tube case.In this case, this component is installed in accordance with Through Hole.It is possible to find devices that supply 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.A total of 40terminations have been recorded.You should set this device to 5V.In total, it contains 40pins.In order for the operation to be performed, the 40pins must be connected.By [0], it is mounted.A minimum working temperature of 0°Cis required to ensure the reliability of the unit.It is imperative that the maximum value of 70°Cis maintained in order to ensure continued operation.The electronic components belong to the Other Microprocessor ICs family.ICs used in interfaces are operated at a supply voltage of 5V.The number of uPs, uCs, and peripheral ICs that are incorporated into this device is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Electronic parts in the IUSC?series are included in this part.It is capable of delivering voltage at 5V degrees Celsius.The device can also be used to find [0].A frequency of 16MHzis capable of achieving good efficiency.In the interface IC, there are 2 serial I/Os.
Z8023016PSC Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z8023016PSC Applications
There are a lot of Zilog Z8023016PSC Specialized Interface ICs applications.
- Communication systems
- High reliability control systems
- High speed data transmission line cards
- Transmit and
- Avionics
- Routers
- PCMCIA cards
- Cell phones
- Signal routing between systems
- High-Voltage
