Z8023016PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z80230 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16.384MHz |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8023016PSG Overview
40-DIP (0.620, 15.75mm)is an appropriate package for this device.The package contains a Tube case.The component has been installed according to the Through Holemethod.There is the potential for the device to supply 4.5V~5.5V volts.A Z80230can be used to identify related parts.It has 40terminations.It is recommended that you set this device to 5V.It contains a total of 40 pins.In order to operate, the 40pins are used.The device is mounted by Through Hole.It operates at a minimum working temperature of 0°C to ensure reliability.When 70°Cis the maximum value, the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.An interface IC operates with a supply voltage of 5V.These devices are incorporated with uPs/uCs/Peripheral ICs of type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.It belongs to the IUSC?series.The device can deliver voltage at 5V.With this device, you can also find [0].In order to ensure good performance, its output frequency should not exceed 16.384MHz.In the interface IC, there are 2 serial I/Os.
Z8023016PSG Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8023016PSG Applications
There are a lot of Zilog Z8023016PSG Specialized Interface ICs applications.
- T1/E1 Terminals
- Communication systems
- Existing multiplexer applications (both fault-protected and
- SONET/SDH ADM
- Audio and video routing
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- Low-Voltage
- ?Central office or PBX (Private Branch Exchange)
- Cable Modem, Cable PC
- Relay Replacement
