Z8023016VSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | Z80230 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z8023016VSG Overview
This fits nicely with the 44-LCC (J-Lead) package.The package contains a Tube case.Surface Mountis the way in which this component is installed.A device capable of providing 4.5V~5.5V volts is available.Using the Z80230you can find related parts.In total, there are 44terminations.Make sure that this device is set to 5V.There are a total of 44 pins on it.For operation, 44pins are used.Surface Mountmounts it.A minimum working temperature of 0°Cis required to ensure the reliability of the device.Keeping 70°Cas the maximum value will ensure consistency.The electronic components is from Other Microprocessor ICs family.The interface IC conducts in a supply voltage of 5V.This device supports SERIAL IO/COMMUNICATION CONTROLLER, SERIALuPs/uCs/peripheral ICs.This electronic part is a member of IUSC? series.Voltage can be delivered at 5V.With the use of this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.A frequency of 16MHzis capable of achieving good efficiency.The interface IC has 2serial I/Os that can be used to connect to the computer.
Z8023016VSG Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 16MHz
Number of Serial I/Os : 2
Z8023016VSG Applications
There are a lot of Zilog Z8023016VSG Specialized Interface ICs applications.
- Digital Cross-Connects
- Relay replacements
- High-Voltage
- Data switching
- Imaging
- ?Digital access cross connects
- (FTTH)
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- E1 Multiplexer
- Access Concentrators
