Z80C3008PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z80C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z80C3008PSC Overview
It's a good fit for the 40-DIP (0.620, 15.75mm) package.The item is packaged in a Tube case.Through Holeis used to install this component.An output voltage of 4.5V~5.5V volts can be provided by the device.Using the Z80C30you can find related parts.It consists of 40terminations.Keep in mind that this device should be set to 5V.40pins are on it in total.For operation, 40pins are used.By [0], it is mounted.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.This value enables the part to run consistently with a maximum value of [0].The electronic components belong to the Other Microprocessor ICs family.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO can also be founded when using this device.In order for the device to perform properly, its output frequency should not exceed 8MHz Hz.Currently, it has 2serial I/O ports.
Z80C3008PSC Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3008PSC Applications
There are a lot of Zilog Z80C3008PSC Specialized Interface ICs applications.
- Automotive applications
- Switching Systems
- Audio and video switching
- Power routing
- Cell phones
- Signal routing between systems
- ?Remote wireless modules
- High reliability control systems
- Cellular phones
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
