Z80C3008PSG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | Z80C30 |
| Pin Count | 40 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Nominal Supply Current | 4mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 8MHz |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z80C3008PSG Overview
It's a good fit for the 40-DIP (0.620, 15.75mm) package.The item is packaged in a Tube case.In this case, this component is installed in accordance with Through Hole.It is capable of supplying a voltage of 4.5V~5.5V.The Z80C30can be used to find related parts.The termination count on it is [0].It is recommended that you set this device to 5V.In total, there are 40pins on the board.Operation is performed through the 40pins.The mount is Through Hole.It is designed to work at a minimum working temperature of 0°C to ensure reliability.When the value is set to [0], the part will run consistently.Other Microprocessor ICsis the family of electronic components.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/peripheral IC.The device is capable of delivering voltage at 5V.This device is also capable of finding [0].In order to ensure good performance, its output frequency should not exceed 8MHz.In the interface IC, there are 2 serial inputs or outputs.
Z80C3008PSG Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3008PSG Applications
There are a lot of Zilog Z80C3008PSG Specialized Interface ICs applications.
- Cell phones
- PDAs
- Automatic test equipment
- Transmit and
- Existing multiplexer applications (both fault-protected and
- DVD-R
- nonfault-protected)
- HDTV
- DSLAMs
- Avionics test equipment
