Z80C3010PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Weight | 5.953513g |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z80C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z80C3010PSC Overview
It's a good fit for the 40-DIP (0.620, 15.75mm) package.A Tubecase is provided with it.This component is installed in the way of Through Hole.An output voltage of 4.5V~5.5V volts can be provided by the device.Based on the [0], it is possible to locate related parts.This termination has 40terminations.Keep in mind that this device should be set to 5V.There are a total of 40 pins on it.In order to operate, we use the 40pins.By [0], it is mounted.In order to ensure reliability, the unit works at a minimum working temperature of [0].This value enables the part to run consistently with a maximum value of [0].The electronic components is from Other Microprocessor ICs family.An interface IC operates with a supply voltage of 5.5V.There are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/Peripheral ICs integrated into this device.With the use of this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Performance requires that the output frequency of the device not exceed 10MHz.This interface IC has a total of 2 serial I/Os available for use.
Z80C3010PSC Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3010PSC Applications
There are a lot of Zilog Z80C3010PSC Specialized Interface ICs applications.
- Communication systems
- Medical systems
- Cellular phones
- Optical Applications
- Channelized and Unchannelized DS3 applications
- Multiplexers
- AD7840/8, AD7870/1/2/4/5/6/8
- SONET/SDH and PDH Multiplexers
- Cell phones
- Avionics
