Z80C3010VSC
| Parameters | |
|---|---|
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z80C30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 10MHz |
| Supply Current-Max | 12mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
Z80C3010VSC Overview
The 44-LCC (J-Lead)package is a good fit for this feature.It comes in a Tube case.The component is installed in the way indicated by Surface Mount.The device is capable of supplying voltages of 4.5V~5.5V volts.Using the Z80C30can help you find related parts.There are 44 terminations on it.It is important to remember that this device should be set to 5V.In total, there are 44pins on the board.A device's operation is controlled by the 44pins.This is mounted by Surface Mount.The device must operate at a minimum working temperature of 0°Cin order to be reliable.In order to maintain consistency, a maximum value of 70°Cis recommended.Electronic components from the family Other Microprocessor ICsare used.There are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/Peripheral ICs integrated into this device.Using this device, TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.For the output frequency to be effective, it should not exceed 10MHz.There are 2 serial I/Os available in the interface IC.
Z80C3010VSC Features
It is based on Z80C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z80C3010VSC Applications
There are a lot of Zilog Z80C3010VSC Specialized Interface ICs applications.
- Precision test equipment
- Automatic test equipment
- Battery Powered Instruments
- USB 1.1 signal switching circuits
- DSLAMs
- SONET/SDH and PDH Multiplexers
- Routers
- PDAs
- Microprocessor Controlled Analog Systems
- Communication systems
