Z84C1008PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 40 |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | Access Control Systems |
| HTS Code | 8542.31.00.01 |
| Subcategory | DMA Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C10 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Number of I/O | 16 |
| uPs/uCs/Peripheral ICs Type | DMA CONTROLLER |
| Supply Current-Max | 35mA |
| Access Time | 8 μs |
| Data Bus Width | 8b |
| Address Bus Width | 16 |
| Bus Compatibility | Z80 |
| Number of DMA Channels | 1 |
| Height Seated (Max) | 4.75mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C1008PEC Overview
The DIPpackage is a good fit for it.Access Control Systemsis appropriate for this component.It is possible to find related parts based on the Z84C10.The terminations on it are [0].It is important to remember that this device should be set to 5V.It has a total of 40pins.In order for the operation to be performed, the 40pins must be connected.Currently, Through Holeis mounting it.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.This value enables the part to run consistently with a maximum value of [0].Electronic components are of the DMA Controllersfamily.These devices are incorporated with uPs/uCs/Peripheral ICs of type DMA CONTROLLER.It belongs to the Z80series.The device can deliver voltage at 5V volts.When operating at a frequency of [0], it is capable of achieving good performance.The device has 16I/Os programmed.Components can supply voltages as low as [0].
Z84C1008PEC Features
It is based on Z84C10.
Set the part at 5V volts
DMA CONTROLLER of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Z84C1008PEC Applications
There are a lot of Zilog Z84C1008PEC Specialized Interface ICs applications.
- Existing multiplexer applications (both fault-protected and
- Battery-powered systems
- Audio signal routing
- Cross Connects
- Signal routing between systems
- Compatible with 65 V DACs and ADCs such as
- HDTV
- Ultrasound
- Optical Applications
- Low-Voltage
