Z84C4106PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 40 |
| Supplier Device Package | 40-PDIP |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 6MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C41 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 10mA |
| Access Time | 6 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Core Architecture | Z8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.75mm |
| Length | 52.325mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C4106PEC Overview
It fits well with the package [0].In this case, this component is installed in accordance with Through Hole.I/O Controlleris appropriate for this component.Based on the [0], it is possible to locate related parts.The termination count on it is [0].It is important to keep in mind that this device should be set to 5V.In total, there are 40pins on the board.In order to operate, the 40pins are used.It is mounted on Through Hole.A minimum working temperature of -40°Cis required to ensure the reliability of the device.In addition to ensuring the consistency of the part, 100°Cis the maximum value possible.Electronic components are of the Other Microprocessor ICsfamily.The interface IC conducts at a voltage of 5V.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/peripheral IC.The electronic part in question belongs to the Z80 series.The device is capable of delivering voltage at 5V.As long as the frequency is set to [0], the device is capable of achieving good efficiency.A serial interface IC has a total of 2I/Os.This component can supply a voltage of [0].
Z84C4106PEC Features
It is based on Z84C41.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 6MHz
Number of Serial I/Os : 2
Z84C4106PEC Applications
There are a lot of Zilog Z84C4106PEC Specialized Interface ICs applications.
- Medical Instrumentation
- Communication systems
- Residential Gateways, Home Gateway/Router
- Modems
- Battery-powered systems
- Digital cross connects (DSX-1)
- SONET/SDH ADM
- Public switching systems and PBX interfaces
- T1/E1 Terminals
- Audio and video routing
