Z84C4208PEC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 40 |
| Supplier Device Package | 40-PDIP |
| Packaging | Tube |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z84C42 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 12mA |
| Access Time | 8 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Core Architecture | Z8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.75mm |
| Length | 52.325mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z84C4208PEC Overview
The PDIPpackage is a good fit for this feature.It comes in a Tube case.There is no installation of this component in the way of Through Hole.In this case, it is appropriate for the component applied in I/O Controller.Based on the [0], it is possible to locate related parts.A total of 40terminations have been recorded.It is important to remember that this device should be set to 5V.The device has a total of 40pins.Operation is carried out through the 40pins.It is mounted on Through Hole.In order to ensure reliability, the unit works at a minimum working temperature of [0].When 100°Cis the maximum value, the part will run consistently.In this case, the electronic components are from the Other Microprocessor ICs family.An interface IC operates at a supply voltage of 5V.There are SERIAL IO/COMMUNICATION CONTROLLER, SERIAL uPs/uCs/Peripheral ICs integrated into this device.It is a member of the Z80series of electronic components.It is capable of delivering voltage at 5V.In operation at a frequency of [0], it is capable of achieving good efficiency.In the interface IC, there are 2 serial I/Os.Components can supply 5Vvoltage.
Z84C4208PEC Features
It is based on Z84C42.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z84C4208PEC Applications
There are a lot of Zilog Z84C4208PEC Specialized Interface ICs applications.
- PDAs
- Routers
- Battery Powered Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- MP3 players
- High-Voltage
- Access Concentrators
- Residential Gateways, Home Gateway/Router
- Medical Instrumentation
- CSU/DSUs
