Z84C4310FEC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 44 |
| Supplier Device Package | 44-QFP |
| Packaging | Tray |
| Published | 2002 |
| Series | Z80 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Applications | I/O Controller |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z84C43 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Memory Size | 2MB |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 15mA |
| Access Time | 10 μs |
| Data Bus Width | 8b |
| Address Bus Width | 1 |
| Core Architecture | Z8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 2.5mm |
| Length | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
Z84C4310FEC Overview
This fits well into the QFP package.The item is packaged in a Tray case.The component has been installed according to the Surface Mountmethod.This component is suitable for the application in I/O Controller.Based on the [0], related parts can be found.This termination has 44terminations.Keep in mind that this device should be set to 5V.There are a total of 44 pins on the device.44 pins are used for operation.This is mounted by Surface Mount.As a result, the device operates at a minimum working temperature of -40°Cto ensure its reliability.Keeping 100°Cas the maximum value will ensure consistency.The electronic components is from Other Microprocessor ICs family.An interface IC operates at a supply voltage of 5V.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The electronic part in question belongs to the Z80 series.Voltage at 5Vcan be delivered by the device.The system is capable of achieving good efficiency when it operates at a frequency of 10MHz.It has 2serial I/Os.Components can supply voltages as low as [0].
Z84C4310FEC Features
It is based on Z84C43.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z84C4310FEC Applications
There are a lot of Zilog Z84C4310FEC Specialized Interface ICs applications.
- Access Concentrators
- New designs requiring multiplexer functions
- Communication systems
- Channelized and Unchannelized DS3 applications
- Industrial control systems
- Isolation
- Relay Replacement
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Data switching
- Cell phones
